Products: Nozzles

A comprehensive assortment of nozzles ensures the correct glue application. Exclusively precision nozzles are used so as to guarantee perfect and long-term use.

For spot and bead applications, multiple bore nozzles with up to four bores are used in addition to the single bore nozzles. Spray applications are available with complete nozzles from brass or high-grade steel or even with lamina nozzles and union nut.

Angle nozzles with one or several glue bores are also available. The angle to the glue bore is 90°, whereby with multiple bore nozzles, the angle between the bores can vary.

Visit our online shop for more information, flyer and manuals.

Please select a nozzle category:

Single bore nozzles

Single bore nozzlesSingle orifice nozzles are used for dot or bead applications. Depending on the glue applicator (module) different nozzles are used. Offered nozzels are:

  • Brass nozzles with different capillary, for module series H300, H400 or hand-held glue applicators from 0,25 to 2mm
  • Brass inset nozzles with stainless steel or ceramics-inset with 2mm capillary Kapillar from 0,15 to 0,75mm
  • Brass screw in nozzles from 0,25 to 1mm
  • Stainless steel nozzles with or without different capillary, some with protective shroud for modules series H300, H400 or hand-held glue applicators from 0,2 to 2mm

Multi bore nozzles

Multi bore nozzlesMulti orifice nozzles are used with dot or bead applications with more than one glue line is applicated. The angle between the bore holes is responsible for appearance of the glue. Offered nozzles are:

  • Brass nozzles with 2-4 orifices, different angles and for modules series H300 und H400, some with flat collar from 0,3 to 0,75 mm
  • Stainless steel nozzles with 2 orifices, different angles and for modules series H300 und H400, some with flat collar and/or with long gorge from 0,3 to 0,75 mm

Spray nozzles

Spray nozzlesSpin spray applications produce a sharp edge. The application  is scarcely visible on the substrate. Spray nozzles can dispense less glue on large areas. The size of the applicated glue depends on the hot air pressure. Offered nozzles are:

  • Brass nozzles with 7 or 12 air orifices left or right twisting, some have special wide air orifices from 0,3 to 2 mm
  • Brass nozzle plates from 0,3 to 1,25 mm
  • Stainless steel nozzles with 7 or 12 air orifices left or right twisting, some have special wide air orifices from 0,25 to 1 mm

Angle nozzles

Angle nozzlesAngle nozzles enable glue application in 90° angle to application module. Offered nozzles are:

  • Brass angle nozzles with 1 or 2 orifices and different angles
  • Stainless steel angle nozzles with one orifice and a slot from 0,3 to 0,5 mm

Slot nozzles

Slot nozzlesSlot nozzles apply a wide area of glue (up to 8 mm). They fit to the Series H300 (with reduction piece), H400 and compatible modules. Offered nozzles are:

  • Stainless steel slot nozzle from 1,5 to 8 mm incl. reduction piece

Nozzle seat MK/NA

Nozzle seat MK/NA) Nozzle seats for the modules series H300 NA/H300 MK include the nozzle. They just have to be screwed into the module. Offered nozzles are:

  • Stainless steel nozzle seat from 0.25 to 1.5 mm; NA also suitable for cold glue applications

Insert nozzles

Inset nozzlesDue to the nozzle insert made of stainless steel or ceramic, brass insert nozzles have a very good thermal conduction. They have a small capillary of 2 mm and suit best to modules series H300 and H200/H400. Offered nozzels are:

  • Brass insert nozzles with stainless steel insert from 0.15 to 0.75 mm</>
  • Brass insert nozzles with ceramic insert from 0.3 to 0.5 mm

Hand-held glue applicator nozzles

Glue gun nozzlesNozzles for hand-held glue applicators from UES and other suppliers. Offered nozzels are:

  • Stainless steel hand gun nozzle from 0.5 to 2 mm; 35 mm length
  • Brass hand applicator nozzle from 0.4 to 2 mm; 15 or 35 mm in length
  • Brass hand applicator slot nozzle 0.5x18 mm
  • Aluminum hand applicator nozzle 1.9 mm; M10 or M14 thread
mininavigation German English French Spanish Dutch Italian Czech Croatian

ADDRESS

UES AG
Breuershofstr. 48
47807 Krefeld
Germany

Tel.  +49 (0)2151/7295-0
Fax  +49 (0)2151/7295-78
info(at)ues-ag.net